I worked around your instructions and the problem looks like it has now gone away! There are also life limits for toners, drums, fuser units, belts etc, which can be changed from the default values. The MFP then decides it is a C which i have never heard of, but it works fine. I removed all toners and drums and put them back again but nothing changed Please sign in to comment. Hey Opus, so far as I know, you can only reset the drums via replacing the fuse.
|Date Added:||11 December 2005|
|File Size:||46.75 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
OKI’s current B B Series driver release resolves driver conflicts, improves your computer’s stability and restores communication with all B Printers. The girl said it’s no problem.
I just spread the tabs and pulled it off. Scroll to okidata corp b4600 initial” is indicated. It just snaps back into place. I tried ur method and it worked great. Yes for a while but okidata corp b4600 the toner out message appears. I actually bought the printer on the basis of your post: I hope this helps. It worked but the print seemed to spear. Refill by holding the toner cartridge upside down and turn the blue okidata corp b4600 to ope the slot.
Instead the printer literally counts every individual toner dot applied to each page to estimate how much toner remains in the cartridge. Leave the drum part in machine as it is light sensitive. This toner seems to work without destroying the drum unit. Then i tried buying Cartridge refilled from The Supplys Corrp. A friend has okodata of these – you cop cut a small piece of white paper and tape it over the toner sensor opening.
If you’re standing in front of the printer, the positions should be black closest to you, yellow next, magenta after that, then cyan farthest away from you. I would try it and see if it works for yours as well.
God Bless, Tom – tmckinney. I sent the entire drum unitm to Uninet and they told okidata corp b4600 that the “doctor blade” was the cause. The first ojidata arrives in 5 seconds, and the printer has an overall okidatz speed of 27 pages-per-minute. After turning on the printer, it states “initializing”, then suddenly makes a loud “CRACK” such as if one okidata corp b4600 the cogwheels of the drum unit or transfer belt are blocked.
The waste toner opening is opposite the blue handle and is now open. I was not able to successfully replace the Cyan drum on my Okidata CDN it took hours and was very okidata corp b4600 and the output was streaked and banded. The OKI printers are very fussy about paper thickness, as this determines the image drum ride coep.
I have 3 of these machines. I have ordered a replacement drum and fuse from Uninet and I will attempt to replace that part in the drum assembly. Don’t think reset procedure works on series or newer machines. I have an OKI C and have gone thru 7 drums in 10 week. The low toner warning does use a physical sensor, but does not contribute to calculating the toner used. The Okidata corp b4600 is compatible with both Mac and PC machines.
Not available with current selections.
OKI Data Americas
You put in the new fuse and then put the unit back in, the fuse blows, telling okidata corp b4600 machine it’s “new”. The black drum failed by being able to only print black as a shade okidata corp b4600 gray.
I have done this a hundred times and never had a MAC reset. I tried popping up the sensor and checked the springs and okidata corp b4600 seemed fine.
By the way, I can also tell you how to reste the drum units. I have an oki n and bought some toner refill. I previoulsy rebuilt the Cyan drum and replaced the wiper and it didn’t work either – still had vertical streaks and banding.
See my instructions earlier on in this forum: It’s a wonderful machine and no problems. Streaky black printing on the left side of the page!!!! But not much usefull at this point. Register the full version to have DriverTool install all missing or corrupt drivers for you automatically!
OKI B n printer BW LED by Office Depot & OfficeMax
I now got a C with network card and duplex unit, with no error warnings. I would still b4060 to be able to monitor how much toner is left with the web okidata corp b4600 – the first post works, but resets everything.
The top procedure worked perfectly okidata corp b4600 my Okidata Cne to reset it after refilling the toner. Before you say that something is blocked with okidataa Magenta Drum Unit or the Transfer belt: Now we’re back in business.
RESET OKIDATA TONER DRUM
Do you yet have a reset procedure for the C? Finally managed to get okidaga drum assembly okidata corp b4600 together again still okidata corp b4600 practice. Also has anyone used this cream with success? I would be interested in knowing where aftermarket toner is bought that would work with machine without having this problem.
I print thousands of full color docs without problem. This works fine if the new toner compartment is totally empty, but if it’s not, you’ll probably lose some good toner. The 8 steps procedure also works in my okidata c Just okidata corp b4600 lights and online and cancel buttons.